|
E-Form Change Control
Form Name : SE 04/03
Revision History
Revision Number |
Date |
Change |
2.0 |
09/10/1998 |
Initial Release |
2.1 |
15/05/1999 |
Layout changes for Filler 2.6 Copy of Licensee’s Reference cell on page
2 ECE approval seat belt marking checks
added and bell cells etc updated Logic re non-locking retractors reversed
and ECE approval detection updated If FMVSS used "Total slip of
webbing" not required. Ctrl-? For cell help added Issue number incremented Ident code made marking on tested seat
belt have no character limit Warning bell turned off on "Angle of locking" for none retractor belt types |
2.2 |
08/08/1999 |
Image changed from FORS to DoTRS, issue and revision numbers incremented, issue date updated. |
2.3 |
22/04/2000 |
Added "Aer4mp" to list of ECE belt types. Removed character limit for "Identification code marking ..", bell for Abrasion test (sash guide) turned off if not Lap/sash belt. |
2.4 |
04/05/2000 |
Omission of "Aer4mp" from acceptable list on page 2 corrected. Revision number for external version changed from "revision 2.2 or earlier" to "Revision 2.4" |
2.5 |
19/12/2001 |
Updated list of aceptable ECE approval belt types to use format of (Z)A,B(e) r (2,3,4,4m,4N)(p) |
2.6 |
15/01/2003 |
Update Departmental Logo. Added "m" option to ECE seat belt markings for 4N type retractors. |
2.7 |
29/07/2003 |
Removed requirement to comply with clauses 20.1.1 and 20.1.2 if ECE approved. |
2.8 |
10/09/2004 |
Added ECE belt type “t”, 4Nm and removed retractor type 2 from markings list. Removed Non-locking check for heavy vehicles. Changed logo. Renumberdd check cells and added Trigger where absent. Removed Data Present. Added Attachment check and check_new_doc. Check for Light Degradation over 100% changed to warning at >103%. |
2.9 |
19/04/2006 |
Relocated Identification of
Component tested to after ECE/FMVSS block, leaving belt type and usage before
ECE/FMVSS block. Altered
dry breaking webbing strength label to refer to FMVSS lap portion only. Changed this item check code to
differeniate between lap only and lap/sash belts. |
2.10 |
4/10/2006 |
Corrected 'Entries Not
Required' banners. Information regarding Identification of Compoment tested
required when radio button AS 2596 is chosen. Added Save/Save As block for
mandatory fields. |
2.11 |
20/03/2008 |
General tidy and update of form |
2.12 |
30/01/2009 |
Increase TFId to accept 6 characters. |
2.13 |
24/06/2009 |
Allow submission of form with UNECE approval number starting with 05. |
2.14 |
15/04/2010 |
Tidy up and correct errors on form. |
2.15 |
27/07/2012 |
Update Departmental Logo. |
2.16 |
30/10/2013 |
Update Departmental Logo. |